To Next PageTo Next PageWhat to do if Mitsubishi Heavy Industries Air Conditioner doesn't restart after power cut?
If your Mitsubishi Heavy Industries Air Conditioner doesn't restart after a power cut, and the auto restart function is not set, use the remote control to start the operation again.
How to restart a Mitsubishi Heavy Industries Air Conditioner after a power cut?
If the auto restart function is not set, your Mitsubishi Heavy Industries Air Conditioner will not restart automatically after a power cut. Use the remote control to start the operation again.
Why is there no airflow when starting the heating on my Mitsubishi Heavy Industries Air Conditioner?
When starting the heating operation, airflow has stopped to prevent blowing out of cold air until the indoor heat exchanger has warmed up. This may take 2 to 5 minutes due to the HOT KEEP program.
What to do if Mitsubishi Heavy Industries Air Conditioner airflow is not warm?
If the airflow from your Mitsubishi Heavy Industries Air Conditioner is not warm, especially when the outdoor temperature is low and humidity is high, it may be defrosting automatically. Please wait.
How to improve cooling on a Mitsubishi Heavy Industries SRK35ZMP-S Air Conditioner?
To improve the cooling of your Mitsubishi Heavy Industries Air Conditioner, consider whether there is any direct sunlight entering the room, if there is a heat source in the room, and if there are too many people in the room.
What to do if my Mitsubishi Heavy Industries Air Conditioner doesn't work?
If your Mitsubishi Heavy Industries Air Conditioner isn't working, check if the power switch is turned off, if the timer has been set in the “ON” position, and if there is a power failure or a blown fuse.
What to do if remote control signals are not received by my Mitsubishi Heavy Industries SRK35ZMP-S?
If the remote control signals are not being received by your Mitsubishi Heavy Industries Air Conditioner, it may be because the signal receiver on the unit is exposed to direct sunlight or other bright light. Try cutting out the sunlight or reducing the other light.
How to troubleshoot a Mitsubishi Heavy Industries Air Conditioner that won't turn on?
If your Mitsubishi Heavy Industries Air Conditioner isn't working at all, check if the power switch is turned on. Also, verify if the timer has been set to the “ON” position. Finally, check for a power failure or a blown fuse.
Why is my Mitsubishi Heavy Industries SRK35ZMP-S not cooling or heating properly?
If your Mitsubishi Heavy Industries Air Conditioner isn't cooling or heating properly, make sure you've set the thermostat to a suitable temperature. Also, check if the air filter is clean and not clogged. Ensure that all doors and windows are closed, there's no direct sunlight entering the room, no heat sources present, and that the room isn't overcrowded.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Power Supply | 220-240 V, 50 Hz |
| Weight (Indoor Unit) | 10 kg |
| Refrigerant | R32 |
| Type | Split System |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 285 mm |
| Noise Level (Indoor Unit) | 21 dB |
| Noise Level (Outdoor Unit) | 50 dB |
