To Next PageTo Next PageWhy is my Mitsubishi Heavy Industries SRK35ZMP-S making a hissing or clicking sound?
If you hear a hissing or clicking sound from your Mitsubishi Heavy Industries Air Conditioner, it's caused by the operation of the refrigerant control valves or electric components.
Why do I hear a cracking sound from my Mitsubishi Heavy Industries SRK35ZMP-S Air Conditioner?
If you hear a slight cracking sound from your Mitsubishi Heavy Industries Air Conditioner, it's due to heat expansion or contraction.
Why do I hear a gurgling sound from my Mitsubishi Heavy Industries Air Conditioner?
If you hear a slight gurgling sound from your Mitsubishi Heavy Industries Air Conditioner, it's caused by refrigerating liquid moving within the unit.
Why does my Mitsubishi Heavy Industries Air Conditioner have a slight smell?
If you notice a slight smell from your Mitsubishi Heavy Industries Air Conditioner, it may be caused by tobacco or cosmetics adhering to the unit. The air blown out during operation may carry this smell.
Why does my Mitsubishi Heavy Industries SRK35ZMP-S release steam during COOL operation?
If you notice some steam escaping during COOL operation of your Mitsubishi Heavy Industries Air Conditioner, this can occur when the room's temperature and humidity are very high. It should disappear as the temperature and humidity decrease.
How to fix Mitsubishi Heavy Industries Air Conditioner remote control not working?
If remote control signals are not received by your Mitsubishi Heavy Industries Air Conditioner, it may be because the signal receiver on the air-conditioner is exposed to direct sunlight or other bright light. If so, cut out the sunlight or reduce the other light.
Why is airflow not blown out for 5 to 15 min at HEATING operation in Mitsubishi Heavy Industries SRK35ZMP-S Air Conditioner?
If your Mitsubishi Heavy Industries Air Conditioner airflow is not blown out for 5 to 15 minutes, or blows not warm wind for a moment during HEATING, and the RUN light blinks slowly (1.5 sec ON, 0.5 sec OFF), the unit may be defrosting automatically due to low outdoor temperature and high humidity. Please wait for it to complete.
What to do if my Mitsubishi Heavy Industries Air Conditioner airflow is not blown out when starting the HEATING operation?
If your Mitsubishi Heavy Industries Air Conditioner isn't blowing air when starting the HEATING operation, but the RUN light blinks slowly (1.5 sec ON, 0.5 sec OFF), it's because the airflow is stopped to prevent cold air from blowing out until the indoor heat exchanger warms up. This may take 2 to 5 minutes due to the HOT KEEP program.
Why doesn't my Mitsubishi Heavy Industries Air Conditioner restart immediately after I turn it off?
If your Mitsubishi Heavy Industries Air Conditioner doesn't restart immediately after being stopped but the RUN light is on, it's because the restart function is blocked for 3 minutes to protect the unit. The microcomputer's three-minute protection timer will automatically restart it.
Why does my Mitsubishi Heavy Industries SRK35ZMP-S sometimes not blow warm air during heating?
If the outdoor temperature is low and humidity is high, your Mitsubishi Heavy Industries Air Conditioner may automatically perform defrosting. Please wait.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Power Supply | 220-240 V, 50 Hz |
| Weight (Indoor Unit) | 10 kg |
| Refrigerant | R32 |
| Type | Split System |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 285 mm |
| Noise Level (Indoor Unit) | 21 dB |
| Noise Level (Outdoor Unit) | 50 dB |
