EasyManuals Logo

Mitsubishi 1540 FD User Manual

Mitsubishi 1540 FD
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Section 1. Operation
Starting and stopping the engine
Before starting the engine, be sure to check the following
points.
1. Confirm that the fuel tank is filled with sufficient fuel.
2. Check the amount of oil in the engine and transmission.
3. Check the coolant water level.
4. Always perform the daily maintenance described in SECTION 2
STARTING
On this tractor, the safety starter switch is provided for preventing unforeseen accidents
form breaking out starting the engine. Installed between the starter switch and the starter
motor, the safety starter switch works as a kind of circuit breaker by which, in case the clutch is
not disengaged completely, the electric circuit in the engine starting system is not closed even
when the key is turned to the START position.
1. Set the throttle lever at the center between idling and high speed
2. After applying the parking brake, place the main shift lever and PTO shift lever in
neutral. Then fully depress the clutch pedal
3. Insert the starter key into the key switch and turn it counter-clockwise and hold it
at the Heat position to heat the glow plugs. As soon as the glow plug signal on
the instrument panel glows red, about 30 seconds latter, rapidly turn the key to
the Start position and the starter motor will rotate and the engine will start
4. When the engine is started, take your hand off the key and the key then
automatically returns to the ON position. The key must be in theOn position
while the engine is running.
5. After starting the engine, make sure the battery charge warning lamp, water
temperature warning lamp and engine oil pressure warning lamp are off. If any
one of the lamps will not turn off, or lights up, stop the engine immediately, check
the cause and then take the necessary countermeasures.
6. If the engine does not start on the first attempt, do not rotate the starter motor
continuously more than 10 second. Then heat the glow plug well and restart the
engine.
7. Warm up the engine especially in cold weather, before working.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi 1540 FD and is the answer not in the manual?

Mitsubishi 1540 FD Specifications

General IconGeneral
BrandMitsubishi
Model1540 FD
CategoryTractor
LanguageEnglish

Related product manuals