5-25
• By using both accelerator pedal and SET/
RESUME switch
1. Use the accelerator pedal to reach the desired
speed.
2. When the desired speed is reached, press the
“SET” side of the SET/RESUME switch. The
vehicle will cruise at the new, higher speed.
3 To decrease the set speed in cruise con-
trol mode
Continue to press the “SET” side of the SET/
RESUME switch. The vehicle will decelerate.
Release the switch when the desired speed is
reached. The vehicle will cruise at the new, lower
speed.
4 To accelerate temporarily in cruise con-
trol mode
Depress the accelerator pedal as you do in normal
accelerating. When the pedal is released, the vehi-
cle will cruise at the set speed again.
Z11829
Z16861
Z16861
Z11829
FE_FG.book Page 25 Wednesday, January 14, 2009 7:08 PM
To Next Page
Loading...
Need help?
General
