Mitsubishi 6G7 Series User Manual

Outlines service specifications for cylinder head flatness, grinding limits, and valve guide/seat dimensions for different engine types.

Details service specifications for thermostat opening temperatures, coolant sensor resistance, and thermal switch continuity.

Lists torque specifications for various engine components like fan, pulleys, tensioners, and engine mounts.

Lists torque specifications for detonation sensor brackets and engine support brackets.

Covers removal and installation of the timing belt for 12-valve FWD engines.

Details timing belt R&I for 12-valve RWD engines.

Provides R&I steps for the timing belt on 24-valve engines.

Specific timing belt R&I for the 2001 Pajero model.

Covers service points for timing belt reassembly, including tensioner installation and auto-tensioner procedures.

Continues R&I for 4-camshaft RWD timing belt.

Step-by-step guide for installing the timing belt on 4-camshaft engines.

Final checks for timing belt installation, including tensioner pulley and crankshaft rotation.

Outlines R&I for rocker arms and camshafts on 12-valve FWD engines.

Details R&I for rocker arms and camshafts on 12-valve RWD engines.

Provides R&I steps for rocker arms and camshafts on 24-valve engines.

Details the process of installing camshafts, including alignment and bearing cap tightening.

Covers the installation of lash adjusters into the rocker arms.

Details the installation of rocker arms, shafts, and bearing caps, including sealant application.

Outlines R&I for camshafts, rocker arms, and bearing caps on 4-camshaft engines.

Outlines R&I for the cylinder head and valves on 2-camshaft engines.

Details the installation of the cylinder head gasket.

Explains the procedure for installing and tightening cylinder head bolts.

Outlines R&I for pistons and connecting rods on 6G72 and 6G73 engines.

Details R&I for pistons and connecting rods on 6G74 engines.

Details service points for removing connecting rod caps and piston pins.

Details the installation of the piston pin.

Details the installation of the connecting rod cap.

Covers the installation and tightening of connecting rod bolts.

Outlines R&I for crankshaft, flywheel, and drive plate on non-GDI engines.

Details R&I for crankshaft, flywheel, and drive plate on GDI engines.

Explains service points for installing crankshaft bearings.

Details the installation of crankshaft bearings and bearing bolts.

Outlines R&I for the cylinder block on FWD vehicles.

Details R&I for the cylinder block on RWD vehicles.

Covers inspection of the cylinder block for damage, wear, and cylinder wall condition.