EasyManua.ls Logo

Mitsubishi ASX

Mitsubishi ASX
368 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Screen type 1 Screen type 2 Cause Solution (Reference)
l
There is a fault in the ABS.
l
Avoid
sudden braking and high-
speed driving, stop the vehicle in
a safe place, and take corrective
measures. Refer to “ABS warn-
ing” on page 4-38.
l
One of the doors or the tailgate
is not completely closed.
The open door is displayed.
l
Close the door or tailgate.
Refer to “Door ajar warning dis-
play screen (when the ignition
switch or the operation mode is
ON)” on page 3-17.
l
The bonnet is open.
l
Close the bonnet.
Refer to “Bonnet” on page
8-03.
––
l
There
is a fault in the electronic
immobilizer (Anti-theft starting
system).
l
Put the operation mode in OFF,
and then start the engine again.
If the warning is not cancelled,
please contact a MITSUBISHI
MOTORS Authorized Service
Point.
––
l
The
driver’s door is open and the
operation mode is put in a mode
other than OFF.
l
Put the operation mode in OFF.
Refer to “Changing the operation
mode” on page 1-12.
Instruments and controls
3-32
3

Table of Contents

Related product manuals