Screen type 1 Screen type 2 Cause Solution (Reference)
––
l
There
is a fault in the steering
wheel lock.
l
Immediately stop the vehicle in a
safe place.
We recommend you to consult a
MITSUBISHI MOTORS Au-
thorized Service Point.
––
l
There is a fault in the electrical
system.
l
Immediately stop the vehicle in a
safe place.
We recommend you to consult a
MITSUBISHI MOTORS Au-
thorized Service Point.
l
The engine is overheated.
l
Stop
the vehicle in a safe place
and take corrective measures.
Refer to “Engine overheating”
on page 6-04.
l
The
automatic transmission
(CVT) fluid temperature is too
high.
Refer to “Automatic transmission IN-
VECS-III Sports Mode 6CVT (Intelli-
gent & Innovative Vehicle Electronic
Control System III)” on page 4-24.
l
You
turned the ignition switch to
the “ON” position or put the op-
eration mode in ON without fas-
tening your seat belt.
l
Fasten your seat belt properly. Re-
fer to “Seat belt warning” on
page 2-11.
Instruments and controls
3-33
3
To Next Page
Loading...
