• Using the Active A/V Network Feature
This A/V Network is a special feature that makes it easier to use
your television and your other A/V components together. When
you connect the A/V Network, you can poin_ tlhe remote control at
the television, and it will "pass" the remote cc,ntrol command to the
other components.
Additionally, you will gain even more benefit,._ if you have a
Mitsubishi VCR equipped for the Active AiV Network. Tile Active
A/V Network allows you to perform many af the commonly used
features of your system at the press of just one button.
This section will explain the various features of the Actiw_ A/V
Network.
before you begin
You must have connected an A/V Network cable from the
Active A/V Network terminal of your TV to the A/V Network IN
terminal of your VCR. See "TV+Mitsubishi products that have
A/V Network terminals," page 40.
• You must have connected your VCR to External 1 (EXT-1) of
your TV.
• You must have set your TV's "A/V Netwo::k" setting to "Active"
or "Basic". See "Setting the A/V Network," page 60.
• Your VCR's remote control switch (if any, should be set to
"VCR-A."
• Your VCR's video mute setting should be turned ON.
DImportant:
what the Active A/V Network does
The Active AN Network makes it easier and faster to use the
VCR's Quick Program and Play commands and the TV's PIP com-
mands.
When using the Active A/V Network, you sl: ould always point your
remote control at your television.
Using the Active A]V Network Features 89
To Next Page
Loading...
Need help?
General
