A-2
4. Additional Instructions
Also note the following points to prevent an
accidental failure, injury, electric shock, etc.
Assumes that incorrect handling may cause
an accidental failure, injury, electric shock,
etc.
1) Transportation and installation
2) Trial run
3) Operation
4) Disposal
(5) General instruction
CAUTION
• When carrying products, use correct lifting
gear to prevent injury.
• Do not install or operate the option unit if it
is damaged or has parts missing.
• Do not stand or rest heavy objects on the
product.
• Check that the mounting orientation is
correct.
• Prevent other conductive bodies such as
screws and metal fragments or other
flammable substance such as oil from
entering the option.
• As the option is a precision instrument, do
not drop or subject it to impact.
• Use the inverter under the following
environmental conditions. Otherwise, the
inverter may be dameged.
*1 Temperature applicable for a short time,
e.g. in transit.
*2 2.9m/s
2
or less for the H185K or more.
CAUTION
• Before starting operation, confirm and
adjust the parameters. A failure to do so
may cause some machines to make
unexpected motions.
WARNING
• Do not modify the equipment.
• Do not perform parts removal which is not
instructed in this manual. Doing so may
lead to fault or damage of the inverter.
Environment
Ambient
Temperature
-10°C to 50°C
(non-freezing)
Ambient
humidity
90% RH or less
(non-condensing)
Storage
temperature
-20°C to 65°C *1
Atmosphere
Indoors (free from
corrosive gas, flammable
gas, oil mist, dust and dirt)
Altitude/
vibration
Maximum 1000m above sea
level 5.9m/s
2
or less
*2
(conforming to JIS C 60068-
2-6)
CAUTION
• Treat as industrial waste.
All illustrations given in this manual may
have been drawn with covers or safety
guards removed to provide in-depth
description. Before starting operation of the
product, always return the covers and
guards into original positions as specified
and operate the equipment in accordance
with the manual.
To Next Page
Loading...
