Mitsubishi FX1S-30MR-ES/UL User Manual

HARDWARE MANUAL
FX
1S
SERIES PROGRAMMABLE CONTROLLERS

Mitsubishi FX1S-30MR-ES/UL Specifications

General

Brand	Mitsubishi
Model	FX1S-30MR-ES/UL
Category	Controller
Language	English

Summary

Notes on the Symbols Used in this Manual

Hardware Warnings

Explains symbols indicating potential physical and property damage.

Software Warnings

1. Introduction

1.1 Model Name

Details the naming convention for FX1s models.

1.4 Configuration

Illustrates system configuration with optional units and ports.

2. Terminal Layouts

2.1 FX1s-**MR-ES/UL

2.2 FX1s-**MR-DS

2.3 FX1s-**MT-DSS

3. Installation Notes

3.1 Product Outline

3.2 FX1s RUN/STOP Control

Explains methods for controlling the PLC's RUN/STOP state.

3.3 General Specifications

Lists environmental and electrical specifications for the FX1s.

3.4 PLC Mounting Arrangements

Provides guidelines and cautions for mounting the PLC unit.

3.6 Termination of Screw Terminals

3.7 Installing Optional Units

4. Power Supply

4.1 Wiring Techniques

4.2 Wiring Cautions

Lists important precautions for wiring I/O and power cables.

4.3 Power Supply

4.4 Power Supply Characteristics

Presents input power requirements and characteristics for different models.

4.5 Power Supply Input Wiring

Shows example wiring diagrams for AC and DC power input.

4.6 Earthing / Grounding

5. Inputs

5.1 24V DC Input Specifications

Details voltage, current, and response time for 24V DC inputs.

5.2 Wiring Diagrams

6. Outputs

6.1 Output Specifications

Compares specifications for relay and transistor output types.

6.2 Relay Output Example

6.5 Transistor Output Examples

6.6 Applying Safe Loads

7. Diagnostics

7.1 Preliminary Checks

7.2 ERROR LED ON (CPU ERROR)

Details troubleshooting steps when the ERROR LED is on.

7.3 Common Errors

7.8 Error Codes

7.10 Device List