Need help?Do you have a question about the Mitsubishi FX1N-40MR-DS and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Manufacturer | Mitsubishi |
| Series | FX1N |
| Input Points | 24 |
| Output Points | 16 |
| Total I/O Points | 40 |
| Output Type | Relay |
| Program Memory | 8K steps |
| Power Supply | AC 100-240V |
| Communication Ports | RS-422 |
| Dimensions | 90 mm x 90 mm x 87 mm |
| Programming Language | Ladder Diagram, Instruction List |
Describes EEPROM and Capacitor backup methods.
Explains methods for controlling the PLC's RUN/STOP status.
Lists key environmental, electrical, and mechanical specifications.
Provides guidelines for mounting the PLC units.
Details correct procedures for connecting wires to screw terminals.
Guides on installing expansion boards and modules.
Lists important precautions for wiring I/O and power cables.
Instructions for connecting AC and DC power supplies.
Lists power supply specifications for different models.
Provides wiring examples for AC, DC, and 12V DC power.
Guidelines for proper earthing and grounding.
Details input voltage, current, and response time.
Shows circuit diagrams for source and sink input connections.
Guidance on safely applying loads to DC and AC outputs.
Diagnosing errors indicated by the ERROR LED.
To Next Page