Need help?Do you have a question about the Mitsubishi MELSEC-F FX1N-40MT-001 and is the answer not in the manual?
General| Brand | Mitsubishi |
|---|---|
| Model | MELSEC-F FX1N-40MT-001 |
| Category | Controller |
| Language | English |
Safety guidelines for users and protection of the FX1N during installation and operation.
Explanation of symbols used in the manual for hardware and software warnings.
Specifies input/output types for global and Japanese models.
Explains the naming convention for FX1N series products.
Details the format and meaning of product serial numbers.
Overview of system configuration and component relationships.
Lists I/O points and current usage for extension and special function blocks.
Describes how the FX1N series can be expanded with additional units.
Information on data retention and backup mechanisms for the FX1N.
Terminal layout diagrams for AC powered FX1N main units.
Terminal layout diagrams for DC powered FX1N main units.
Terminal layouts for FX2N and FXON series extension blocks.
Describes the physical features and components of the FX1N PLC.
Explains the methods for controlling the PLC's RUN and STOP states.
Lists environmental, resistance, and electrical specifications for the FX1N.
Guidance on proper mounting to ensure adequate ventilation and prevent overheating.
Instructions for mounting the PLC unit onto a standard DIN rail.
Details on how to mount the PLC unit directly using screws.
Procedures for correctly terminating cables at screw terminals.
Best practices and cautions for wiring the FX1N products safely.
General explanation for installing special function boards and modules.
General guidance and precautions for wiring power connections.
Instructions for connecting AC and DC power supplies to the PLC.
Specifications for AC and DC power supply requirements for different models.
Illustrative wiring diagrams for AC and DC power supply connections.
Information on the service current capability of AC powered FX1N units.
Guidelines for proper grounding of the PLC system.
Detailed specifications for 24V DC input voltage and current.
Diagrams showing typical wiring for source and sink input configurations.
Circuit diagrams for connecting 24V DC inputs on main units and extension blocks.
Guidelines for connecting diodes/inputs in series and using resistors in parallel.
Specifications for the AC110V input extension block.
Circuit diagram for connecting the AC110V input extension block.
Notes on programming limitations when using 110V AC input units.
Comparison of specifications for Relay and Transistor output types.
Typical wiring example for relay output configurations.
Wiring examples for transistor output configurations, including Japanese models.
Test results for load capacity, life, and response times for outputs.
Guidelines for safely applying loads to PLC outputs and safety interlocks.
Initial checks to perform before operating or troubleshooting the PLC.
Explains causes and remedies when the ERROR LED is lit.
Lists common error conditions and recommendations for routine maintenance.
Overview of internal operation and error status flags (M bits).
Description of status and error registers (D registers) for monitoring.
Listing of specific error codes and their meanings for diagnostics.
A reference list of PLC programming instructions with function codes.
A comprehensive list of PLC memory devices (timers, counters, registers).
To Next Page