7
Note: This document is for reference only. For detailed settings and safety information refer to the respective product manual.
While the “Please install the OS” screen is displayed, go to the “OS Install ->
GOT” tab in the “Communicate with GOT” window of GT Designer2 and select
“Standard monitor OS” and select ‘FREQROL 500/700’ from the
‘Communication Driver’ menu. Use the “Install” button to initiate the data
transfer and update the firmware. Once the firmware update has been
completed the GOT will automatically reboot and all features will be up to date.
Note that new project data will need to be downloaded to the GOT.
Select the following under communication driver
To Next Page
Loading...
