Need help?Do you have a question about the Mitsubishi GOT1000 GT15 and is the answer not in the manual?
General| Display Size | 10.4 inches |
|---|---|
| Display Type | TFT Color LCD |
| Resolution | 640 x 480 pixels |
| Touch Panel Type | Analog resistive film |
| Power Supply | 24V DC |
| Backlight | LED |
| Protection Rating | IP65 (front panel) |
| Interface | RS-232, RS-422/485, USB |
| Operating Temperature | 0°C to 50°C |
| Memory | 9 MB |
| Storage Temperature | -20 to 60°C |
| Display Colors | 256 colors |
Details failures of GOT, communication units, and touch panels causing serious accidents.
Covers terminal safety, battery handling, and power-off procedures for maintenance.
Discusses touch panel adjustment and potential position discrepancies.
Highlights electrical shock and injury risks during backlight replacement.
Outlines the basic steps before operating the GOT.
Details EMC requirements and precautions.
Covers Low Voltage Directive compliance and installation categories.
Explains how to configure the system for EMC compliance.
Provides essential wiring and connection guidelines for EMC compliance.
Specifies mounting dimensions within the control panel.
Provides dimensions for cutting the panel for installation.
Details recommended clearances and positions for installation.
Step-by-step guide for installing the GOT.
Explains how to connect power supply and related components.
Details wiring of power and ground cables to the GOT.
Covers grounding methods and examples for safety and noise reduction.
Differentiates and explains wiring within and outside the panel.
Lists and describes applicable communication units.
Explains CF card units and their installation.
Covers CF card types and insertion/removal methods.
Information on batteries, specifications, and replacement.
Covers setting communication interfaces and parameters.
Details communication parameters for specific devices.
Covers display-related configurations like opening screen, save time, language.
Covers setting and displaying system time and battery status.
Introduces debugging functions for PLC CPU and system response.
Lists self-check items for screen data and memory.
Details setting notification times for backlight, display, and touch keys.
Explains how to reset maintenance counters.
Lists OS requirements for utility execution.
Provides methods for installing OS using memory cards.
Provides restoration methods for GOT malfunctions.
Guides on diagnosing and resolving bus connection issues.
Lists and explains error messages and system alarms.
To Next Page
