13.3 Project Information
13.3.1 Functions of the project information
13 - 15
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE
SETTING
11
DISPLAY AND
OPERATION
SETTINGS
12
CLOCK SETTINGS
AND BATTERY
STATUS DISPLAY
13
FILE DISPLAY AND
COPY
14
GOT SELF CHECK
15
CLEANING OF
DISPLAY SECTION
16
MAINTENANCE
TIME NOTIFICATION
SETTING
13.3 Project Information
13.3.1 Functions of the project information
The project data files stored in each drive (A: standard CF card, B: Extended memory card, C: built in flash
memory) can be displayed by lists.
In addition, the files can be downloaded, uploaded, deleted or copied, etc.
Precautions for operating project data
When the OS boot drive is set to [A: Standard CF Card], deleting, copying,
downloading, setting up, and uploading project data are not available.
Function Description Reference page
Information display of files and folders Displays the kind, name, data size, the creation date and time of the file or folder. 13-17, 13-18
Delete Deletes project data. 13-39
Copy Copies project data. (can copy between the A drive and B drive or in each drive) 13-19
Property display
Displays the project data creation date, author name and the version of GT
Designer3 or GT Designer2.
13-13
Data check Data check of the file can be executed. 13-14
Download
Downloads the project data written in the A drive (Standard CF card) / B drive
(Extended memory card) to C drive (Built in flash memory).
13-23
Setup The project data to be displayed can be selected. 13-25
Upload
Uploads the project data written in the C drive (Built in flash memory) to the A drive
(Standard CF card) / B drive (Extended memory card).
13-26
Setup cancel Cancels the item which is selected for the project data to be displayed. 13-27
To Next Page
Loading...
Need help?
General
