Mitsubishi GOT1000 GT15 - System Alarm Display; System Alarm Display Function; Displaying the System Alarm Display

14.9 System Alarm Display
14.9.1 System alarm display function
14 - 35
9
UTILITY FUNCTION
10
COMMUNICATION INTERFACE SETTING
11
DISPLAY AND OPERATION SETTINGS
12
CLOCK SETTINGS AND BATTERY STATUS DISPLAY
13
FILE DISPLAY AND COPY
14
GOT SELF CHECK
15
CLEANING OF DISPLAY SECTION
16
MAINTENANCE TIME NOTIFICATION SETTING
14.9 System Alarm Display
14.9.1 System alarm display function
System alarm display is the function to display error code and error message when an error occurs in GOT,
controller or network.
System alarms can be reset on the System alarm display screen.
For details of system alarm, refer to the following manual.
• GT Designer3 Version1 Screen Design Manual (Functions) (10. ALARM)
• GT Designer2 Version Screen Design Manual (8. ALARM)
14.9.2 Displaying the system alarm display
Main menu
[Debug & self check]
System alarm display
Touch [Debug & self
check].
Touch [System alarm
display].
Touching Reset resets the
system alarm display in the
GOT error.
( 9.3 Utility Display)