Mitsubishi GOT1000 GT15 - 14.7 I;O Check

14.7 I/O Check
14.7.1 I/O check function
14 - 17
9
UTILITY FUNCTION
10
COMMUNICATION INTERFACE SETTING
11
DISPLAY AND OPERATION SETTINGS
12
CLOCK SETTINGS AND BATTERY STATUS DISPLAY
13
FILE DISPLAY AND COPY
14
GOT SELF CHECK
15
CLEANING OF DISPLAY SECTION
16
MAINTENANCE TIME NOTIFICATION SETTING
14.7 I/O Check
14.7.1 I/O check function
The I/O check is a function which checks whether GOT and PLC can communicate with each other.
If I/O check ends normally, the communication interface and the connection cable hardwares are normal.
To execute I/O check, the communication driver has to be installed in GOT in advance from GT Designer3 or
GT Designer2.
Refer to the following for the details related to the installation of the communication driver.
• GT Designer3 Version1 Screen Design Manual (Fundamentals) (7 COMMUNICATION
WITH GOT)
• GT Designer2 Version Basic Operation/Data Transfer Manual
(8. TRANSFERRING DATA)
(1) Communication drivers inapplicable to I/O check
When the following communication drivers are used, the I/O check cannot be executed.
Connection type Communication driver
Connection
to
MITSUBISHI
PLC
MELSECNET/H
connection
MELSECNET/H
MELSECNET/10
connection
MELSECNET/H, MELSECNET/10
CC-Link IE Controller
Network connection
CC-Link IE Controller Network
CC-Link IE Field
Network connection
CC-Link IE Field Network
CC-Link connection
(Intelligent device
station)
CC-Linlk (ID), CC-Link Ver.2(ID)
Ethernet connection Ethernet(MELSEC), Q17nNC, CRnD-700
Connection to FUJI PLC FUJI PXR/PXG/PXH
Connection to YASKAWA PLC YASKAWA GL/CP9200(SH/H)/CP9300MS, Ethernet (YASKAWA)
Connection to YOKOGAWA PLC YOKOGAWA FA500/FA-M3/STARDOM, Ethernet (YOKOGAWA)
Connection to ALLEN-BRADLEY PLC EtherNet/IP(AB)
Connection to SIEMENS PLC SIEMENS S7-200, SIEMENS S7-300/400, Ethernet (SIEMENS S7)
Microcomputer connection Computer
Inverter connection FREQROL 500/700/800, Sensorless servo
MODBUS /TCP connection
MODBUS/TCP
AZBIL control equipment connection Azbil SDC/DMC
Connection to RKC temperature
controller
RKC SR Mini HG (MODBUS)