Mitsubishi GOT1000 GT15 - Operating the Time Setting & Display

12.1 Time Setting and Display
12.1.3 Operating the time setting & display
12 - 3
9
UTILITY FUNCTION
10
COMMUNICATION INTERFACE SETTING
11
DISPLAY AND OPERATION SETTINGS
12
CLOCK SETTINGS AND BATTERY STATUS DISPLAY
13
FILE DISPLAY AND COPY
14
GOT SELF CHECK
15
CLEANING OF DISPLAY SECTION
16
MAINTENANCE TIME NOTIFICATION SETTING
12.1.3 Operating the time setting & display
1 Clock setting
Setup the method to adjust the time between GOT data and the clock data of controller connected to
the GOT.
Setting Description
Adjust
Adjust the time of GOT clock data to the clock data of controller.
It is same as set in the GOT setup in Environmental Setting of GT Designer3 or in System Environment of
GT Designer2.
• GT Designer3 Version1 Screen Design Manual (Fundamentals)
(4.9.2 How to match clock data between the GOT and controllers)
• GT Designer2 Version Screen Design Manual (2.5 Clock Function)
Broadcast
Adjust the time of controller clock data to the clock data of GOT.
It is same as set in the GOT setup in Environmental Setting of GT Designer3 or in System Environment of
GT Designer2.
• GT Designer3 Version1 Screen Design Manual (Fundamentals)
(4.9.2 How to match clock data between the GOT and controllers)
• GT Designer2 Version Screen Design Manual (2.5 Clock Function)
None No adjustment of clock data.
Adjust/Broadcast
Adjust the GOT and controllers to the controller whose clock data is used as a base.
It is same as set in the GOT setup in Environmental Setting of GT Designer3 or in System Environment of
GT Designer2.
• GT Designer3 Version1 Screen Design Manual (Fundamentals)
(4.9.2 How to match clock data between the GOT and controllers)
• GT Designer2 Version Screen Design Manual (2.5 Clock Function)
1 If touch the setup item, the setup contents
is changed.
2 If touch button, the setup contents
is reflected.
Adjust
Broadcast
Adjust/Broadcast
None
OK