10 - 20
10.3 Ethernet Setting
10.3.3 Display contents of Ethernet setting
10.3.3 Display contents of Ethernet setting
The following describes the setting items and the display contents of the Ethernet setting.
(1) Ethernet setting tab
[*] is displayed when the setting is changed.
(2) Ethernet setting items
The contents of the Ethernet setting configured in GT Designer3 are displayed.
Only [Host], [NW No.] and [PC No.] are displayed for GT1555-Q and GT1550-Q.
The setting of the host station can be changed.
Change of host
(3) Restore default settings
If touch this button, the change of the setting is canceled and the setting returns to the status when
the project data was written.
(1) How to cancel the change of the setting in the [Ethernet setting] screen.
Cancel the settings changed in the [Ethernet setting] screen with the [Restore
default settings] button.
The changed settings remain until they are canceled with the [Restore default
settings] button.
The changed settings are not canceled even if writing the project data or OS to
the GOT.
When the project data is written to the GOT without canceling the changed
settings, those changed settings are reflected to the Ethernet setting of the written
project data. (If the written project data does not have a channel with same
Ethernet settings as that of the channel changed in [Ethernet setting] screen, the
changed settings are not reflected.)
1)
3)
2)
To Next Page
Loading...
Need help?
General
