18 - 11
18.5 CoreOS
18.5.1 Installing the CoreOS
18.5 CoreOS
Install CoreOS only when the GOT will not be the status of factory shipment even when BootOS is installed.
Normally, the CoreOS has not to be installed.
Precautions for installing CoreOS
When executing the CoreOS installation once, it cannot be canceled on the way.
Do not attempt the followings to cancel the installation on the way.
The GOT may not operate.
• Powering the GOT off.
• Pressing the GOT reset button.
If the GOT does not operate, please consult your local Mitsubishi (Electric
System) Service center or representative.
If the GOT does not recover even when installing the CoreOS, the error may be caused by a hardware
failure.
Please consult your local Mitsubishi (Electric System) Service center or representative.
18.5.1 Installing the CoreOS
1 Before installing the CoreOS
(1) Installing procedureThe CoreOS can be installed only when using a memory card.
Installation via USB/RS-232/Ethernet is not available.
(2) Memory card to be used
Memory card of 32MB or more is required.
(3) Boot OS
When installing the CoreOS, the latest BootOS is also installed automatically.
(Operation by the user is not required.)
To Next Page
Loading...
Need help?
General
