18.5 CoreOS
18.5.1 Installing the CoreOS
18 - 12
17
ADDITION TIMES RESET
FOR MAINTENANCE TIME
NOTIFICATION
18
INSTALLATION OF
COREOS, BOOTOS AND
STANDARD MONITOR OS
19
MAINTENANCE AND
INSPECTION
20
TROUBLESHOOTING
APPENDICESINDEX
2 Installing the CoreOS
1 Write the CoreOS from GT Designer3 or GT Designer2 to the CF card.
For details of GT Designer3 or GT Designer2 operation, refer to the following manual.
• GT Designer3 Version1 Screen Design Manual (Fundamentals)
(7 COMMUNICATION WITH GOT)
• GT Designer2 Version Basic Operation/Data Transfer Manual
(8. TRANSFERRING DATA)
2 After confirming that the GOT is powered off, install the CF card in the GOT.
After installing, switch the CF card access switch on.
3 Powering the GOT on displays the following screen.
To cancel the installation, power the GOT off and remove the CF card.
To Next Page
Loading...
