Need help?Do you have a question about the Mitsubishi MELSEC-GOT F940 and is the answer not in the manual?
General| Power Supply | 24V DC |
|---|---|
| Operating Temperature | 0 to 50°C |
| Humidity | 10 to 90%RH (non-condensing) |
| Display Size | 5.7 inches |
| Resolution | 320 x 240 pixels |
| Touch Panel | Resistive film |
| CPU | 32-bit RISC |
| Communication Ports | RS-422 |
| Vibration Resistance | 10 to 57 Hz |
| Shock Resistance | 147 m/s² (15G) |
| Storage | Flash memory |
Details direct connection of GOT to PLC using specific cables and configurations for various PLC series.
Explains using the GOT's built-in two-port interface for connection to PLCs, including interface types and usage notes.
Provides pin assignments and connection diagrams for transfer cables (FX-232CAB-1, FX-232CAB-2, F2-232CAB-1) for PC connection.
Covers connecting the GOT to FX/FX2C/A Series PLCs via the CPU port, including specific PLC models.
Provides pin assignment and connection diagrams for various connection cables used for CPU port connections.
Explains how to connect multiple GOT units (1-to-N connection) to a single PLC, detailing communication types and distances.
Shows connection diagrams for GOT to MELSEC A Series PLCs via computer link units for RS-422 and RS-232C communication.
Illustrates connection diagrams for GOT to OMRON SYSMAC C Series PLCs via host link units for RS-422 and RS-232C.
Details connection diagrams for GOT to FUJI ELECTRIC FLEX-PC N Series PLCs using link units for RS-422 and RS-232C.
Introduces general-purpose communication, explaining the GOT's role and data area interaction with host units.
Provides the wiring diagram for connecting the GOT to a host unit using RS-232C for general-purpose communication.
Explains how to set communication parameters like baud rate, data length, stop bits, and parity for general-purpose communication.
To Next Page
