Mitsubishi MELSEC-GOT F940 - Connection to FLEX-PC N Series

Connection to FLEX-PC N Series 6.
6-1
6. Connection to FLEX-PC N Series
The GOT can be connected to the FLEX-PC N Series manufactured by FUJI Electric via a link
unit shown below.
• Connection type
• Applicable PLC units and link units
< FLEX-PC N Series >
A link unit (general-purpose RS-232C/RS485 interface module) is required to be con-
nected. Or a CPU in which an RS-232C interface is built in is required.
• System configuration
Link port connection (RS-422)
Link port connection (RS-232C)
CPU port connection (RS-232C)
Select the connection type using
the operation environment setting
described in the next section or
the screen creation software.
RS232C
RS422
RS232C
RS422
To link unit or built-in RS-232C interface
F940GOT-SED-E/LWD-E