Mitsubishi GOT1000 GT15 - Operating the Maintenance Timing Setting

16.1 Maintenance Timing Setting
16.1.3 Operating the maintenance timing setting
16 - 4
9
UTILITY FUNCTION
10
COMMUNICATION INTERFACE SETTING
11
DISPLAY AND OPERATION SETTINGS
12
CLOCK SETTINGS AND BATTERY STATUS DISPLAY
13
FILE DISPLAY AND COPY
14
GOT SELF CHECK
15
CLEANING OF DISPLAY SECTION
16
MAINTENANCE TIME NOTIFICATION SETTING
16.1.3 Operating the maintenance timing setting
1 Touch a select button (item to be set) on the screen.
• Key: If touched, displays the keyboard in the bottom part of the screen.
Remark
If touch after inputting the value out of the setting range, the alarm message
is displayed.
2 If touch button, the settings are reflected.
3 If touch button instead of touching button, the settings are canceled after the dialog below is
displayed, and the screen closes.
4 If touch button, GOT restarts.
5 After restart, GOT operates with the changed settings.
(For keyboard operation, refer Section 9.3.3 Basic operation of settings change
page.)
Define the numerical input by .
Numerical
Enter
Enter
Example:
OK
OK