Mitsubishi GOT1000 GT15 - Security Level Change Operation

11 - 19
11.4 Security Level Change
11.4.3 Security level change operation
11.4.3 Security level change operation
1 Password input operation
備考
About forgetting to return to the original level after changing security level temporarily
When use GOT after temporarily changing the security level, do not forget to return
the security level to the original level.
1 By touching to , to key, the
password of the changed security level is
input.
2 When correcting the input character, touch
key to delete the correcting character
and input the password again.
3 After inputting password, touch the
key.
When the password matches, the normal
completion message is displayed. When
the password does not match, an error
message is displayed.
4 If button is touched it returns to the
password input screen again.
5 If button is touched it returns to
security setting screen.
0
9
A
F
Del
Enter
OK