Mitsubishi GOT1000 GT15 - Trigger Backup Setting Operation

11 - 49
11.14 Trigger Backup Settings
11.14.3 Trigger backup setting operation
11.14.3 Trigger backup setting operation
1 Touch a setting item for the trigger type,
and then the setting is changed.
2 Touch a setting item for check changes,
and then the setting is changed.
3 When the trigger type is changed, a
password input window appears by
touching the button.
Input the password for the backup/restore.
When the password is verified, the settings
are reflected, and then the screen returns
to the trigger backup setting screen.
When the trigger type is not changed,
touching the button reflects the
settings.
1
2
3
4
(None Rise Time)
None : The GOT does not execute
the trigger backup.
Rise : The GOT backs up data when
the trigger device turns on.
Time : The GOT backs up data at the
specified time.
: Backup is executed regardless
of whether the backup data has
been changed.
: When the backup is executed,
the GOT checks if the backup
data and the data stored in the
file register have been changed
after the previous backup.When
the data has been changed, the
GOT backs up the changed
data.
: When the backup is executed,
the GOT checks if the backup
data has been changed after the
previous backup. When the data
has been changed, the GOT
backs up the changed data.
However, the GOT does not
check if the data stored in the file
register has been changed.
OK
OK