11.14 Trigger Backup Settings
11.14.3 Trigger backup setting operation
11 - 50
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE
SETTING
11
DISPLAY AND
OPERATION
SETTINGS
12
CLOCK SETTINGS
AND BATTERY
STATUS DISPLAY
13
FILE DISPLAY AND
COPY
14
GOT SELF CHECK
15
CLEANING OF
DISPLAY SECTION
16
MAINTENANCE
TIME NOTIFICATION
SETTING
Precautions for setting
When the trigger type is set to [Rise], set the trigger device with GT Designer3 or GT
Designer2 in advance.
Failure to do so disables the backup setting with [Rise] set.
4 When the trigger type is set to [Time],
touch a setting item for [Detail] and the
screen is switched to the trigger time
setting screen.
In the screen, specify the days and time
that the GOT executes the backup.
5 Touch the button without touching the
button, and then the dialog box
shown left is displayed.
6 After all settings in the backup/restoration
setting are completed, end the backup/
restoration setting and GOT setup with
touching the button, and then the
settings are reflected.
Day : Select days that the GOT
executes the backup by
touching displayed items.
Multiple days can be selected.
Time : Set the time that the GOT
executes the backup by
touching the displayed item.
OK
To Next Page
Loading...
