13.10 Special Data Information
13.10.4 Special data information operation
13 - 89
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE
SETTING
11
DISPLAY AND
OPERATION
SETTINGS
12
CLOCK SETTINGS
AND BATTERY
STATUS DISPLAY
13
FILE DISPLAY AND
COPY
14
GOT SELF CHECK
15
CLEANING OF
DISPLAY SECTION
16
MAINTENANCE
TIME NOTIFICATION
SETTING
5 Download operation
Transfers the special data written in the A drive (Standard CF Card) or B drive (Extended memory card)
to the C drive (Built-in flash memory).
The GOT monitors C drive data.
(This item explains using the A drive.)
Special data to be stored in a CF card
When storing the project data from GT Designer3 or GT Designer2 to CF card,
select [C: Built-in flash memory] for [Project Data] in [Boot Drive].
1 Install a CF card on the GOT
Refer to the following for inserting/
removing method of CF card.
8.8 CF Card
2 Touch [A: Standard CF Card] in Select
drive.
(Continued to next page)
To Next Page
Loading...
