Mitsubishi GOT1000 GT15 - 11.4 Security Level Change

11.4 Security Level Change
11.4.1 Security level change functions
11 - 18
9
UTILITY FUNCTION
10
COMMUNICATION INTERFACE SETTING
11
DISPLAY AND OPERATION SETTINGS
12
CLOCK SETTINGS AND BATTERY STATUS DISPLAY
13
FILE DISPLAY AND COPY
14
GOT SELF CHECK
15
CLEANING OF DISPLAY SECTION
16
MAINTENANCE TIME NOTIFICATION SETTING
11.4 Security Level Change
11.4.1 Security level change functions
Changes the security level to the same security level set by each object or screen switch.
To change the security level, input the password of the security level which is set in GT Designer3 or GT
Designer2.l
Restrictions on screen display
The security level change screen cannot be displayed when project data do not exist
in GOT.
Change the security level after downloading the project data to GOT.
11.4.2 Displaying the security level change
Security level setting...................
• GT Designer3 Version1 Screen Design Manual
(Fundamentals) (4.7 Security Setting)
• GT Designer2 Version
Screen Design Manual
(5.8 Security function)
Password setting.........................
• GT Designer3 Version1 Screen Design Manual
(Fundamentals) (4.7 Security Setting)
• GT Designer2 Version
Screen Design Manual
(3.5 Set Password)
GOT setup
Operation settings
Security level change
Security setting
Touch
[Security level change]
Input the password of
the security level which
is set in GT Designer3
or GT Designer2.
Touch
[Security setting]
Touch
[GOT setup]
Main menu
Touch
[Operation]
( 9.3 Utility Display)