11 - 17
11.3 Operation settings
11.3.3 Setting operation of operation
2 Security setting
Refer to the following for the security setting operation
11.4 Security Level Change
3 Utility call key
Refer to the following for the utility call key operation
11.5 Utility Call Key Setting
4 Key sensitivity setting
5 Touch panel adjustment
Refer to the following for touch panel adjustment operation.
11.6 Adjusting the Touch Panel Position (Touch panel calibration Setting)
6 SoftGOT-GOT link function setting
Refer to the following for the SoftGOT-GOT link function setting operation.
11.7 SoftGOT-GOT Link Function Setting
3 If touch button without touching
button, the dialog mentioned left is
displayed.
4 If close the display setting and GOT setup
screens with button after completing
the setting of all items to change, GOT
restarts and reflects the setting contents.
1 If touching the setting items, keyboard is
displayed.
Input numeric with the keyboard.
2 The key response speed corresponding to
the [Key sensitivity] setting is displayed.
3 Touching the button determines the
setting.
OK
OK
To Next Page
Loading...
