12.1 Time Setting and Display
12.1.1 Time setting and display functions
12 - 1
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE
SETTING
11
DISPLAY AND
OPERATION
SETTINGS
12
CLOCK SETTINGS
AND BATTERY
STATUS DISPLAY
13
FILE DISPLAY AND
COPY
14
GOT SELF CHECK
15
CLEANING OF
DISPLAY SECTION
16
MAINTENANCE
TIME NOTIFICATION
SETTING
12. CLOCK SETTINGS AND BATTERY
STATUS DISPLAY
(TIME SETTING AND DISPLAY)
The clock display setting items and the time when displayed the setting screen are displayed.
(While displaying clock and the seting screen, the display time does not change.)
The voltage status of the built-in battery is also displayed.
12.1 Time Setting and Display
12.1.1 Time setting and display functions
Time settings and displaying of the status of GOT built-in battery are possible.
Changing times
When the time is changed on the Time setting & display screen, the changed time is
written in a programmable controller even though [Adjust] or [Broadcast] is set for
[Clock setting].
As a result, the time of the programmable controller can be changed on the GOT
even though [Adjust] is set for [Clock setting].
The clock data of the controller set as [Adjust CH No.] of [Clock data GOT is
matched to clock data External (Adjust)] in [GOT Setup] ([Clock Setting]) of GT
Designer3 or in [System Environment] ([Time setting]) of GT Designer2 is changed.)
For details of [Adjust] and [Broadcast], refer to the following manual.
• GT Designer3 Version1 Screen Design Manual (Fundamentals)
• GT Designer2 Version Screen Design Manual
Function Description
Reference
page
Clock setting
Setup the method to adjust the time between GOT clock data and clock
data of controller connected to the GOT.
12-3
Clock display Carry out the display and setup of GOT clock data. 12-5
GOT internal battery voltage
status
Displays GOT internal battery voltage status. 12-6
To Next Page
Loading...
Need help?
General
