10.3 Ethernet Setting
10.3.3 Display contents of Ethernet setting
10 - 21
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE
SETTING
11
DISPLAY AND
OPERATION
SETTINGS
12
CLOCK SETTINGS
AND BATTERY
STATUS DISPLAY
13
FILE DISPLAY AND
COPY
14
GOT SELF CHECK
15
CLEANING OF
DISPLAY SECTION
16
MAINTENANCE
TIME NOTIFICATION
SETTING
(2) Range where the settings changed in the [Ethernet setting] screen are reflected
The settings changed in the [Ethernet setting] screen are valid in the GOT.
On the other hand, they are not overwritten to the project data written to the GOT.
The changed settings are not reflected to the project data which is read from the
GOT after changing the settings.
If the GOT data is copied with the GOT data package acquisition, the change in
the [Ethernet setting] screen is reflected to the copied data.
1 Change of host
1 Touch the device to be set as the host.
2 Setting contents are defined if button
is touched.
3 If touch button without touching
button, the dialog mentioned left is
displayed.
4 Touch the button to restart GOT and to
reflect the setting contents.
To Next Page
Loading...
