14 - 34
14.8 NETWK Unit Status Display
14.8.3 Display example of the NETWK unit status display
(2) Data link information
Displays the CC-Link communication unit (GT15-J61BT13) data link startup status and error status.
No. Item Description
(b) D-Link Boot Status
Displays the data link startup status.
D-Link in prog. : Data link being executed
D-Link Offline : Data link being stopped
Initialize : Set to the initial status
Parameter wait : Parameter not received
Disconnect (No Polling) : In cut-off status with no inquiry from master
station
Disconnect (Line Err) : In cut-off status due to line error
Disconnect (Other) : In cut-off status due to other causes
Testing Line : Line test being executed
Testing Pram Setup : Parameter setting test being executed from
master station
Auto Reconnecting : Return processing being executed
automatically
Reset. in prgr. : CC-Link communication unit being reset
(GOT reset status)
(c) Error Status
Displays the status of the current error.
Normal : Normal status
Invalid TransPath : Transmission path error detected
Invalid Parameter : Parameter error detected
CRC Error : Reception data error detected
Time Out Error : Timeout error detected in data reception
Abort Error : Error detected in data communication
Invalid Setup
: Invalid station number, station type,
transmission speed, or mode setting
detected
Other Abnormality : Error due to some other cause detected
To Next Page
Loading...
