13.3 Project Information
13.3.4 Operation of project information
13 - 23
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE
SETTING
11
DISPLAY AND
OPERATION
SETTINGS
12
CLOCK SETTINGS
AND BATTERY
STATUS DISPLAY
13
FILE DISPLAY AND
COPY
14
GOT SELF CHECK
15
CLEANING OF
DISPLAY SECTION
16
MAINTENANCE
TIME NOTIFICATION
SETTING
6 Download operation/setup operation
(1) Download operation
Transfers the project data stored in the A drive (Standard CF Card) or B drive (Extended memory
card) to the C drive (Built in flash memory). (The GOT monitors using the data in the C drive.)
(This item explains using the A drive.)
Before download operation
(1) Setup cancel
When the project data in the A drive or B drive is set up, the project data cannot
be downloaded to the C drive.
Execute setup cancel ( (2) Setup cancel) before downloading the project
data.
(2) Project data to be stored in a CF card
When storing the project data from GT Designer3 or GT Designer2 to CF card,
select [C: Built-in flash memory] for [Project Data] in the [Boot Drive].
1 Install a CF card in the GOT
Refer to the following for inserting/
removing method of CF card.
8.4 Video/RGB Unit
2 Touch [A: Standard CF Card] in Select
drive
(Continued to next page)
To Next Page
Loading...
