13 - 26
13.3 Project Information
13.3.4 Operation of project information
7 Upload/setup cancel operation
(1) Upload operation
By upload operation, the project data is transferred from the C drive (Built in flash memory) to the A
drive (Standard CF Card) or B drive (Extended memory card).
The CF card after uploading can be used for downloading project data to another GOT.
(This item explains using the A drive.)
Before setup operation
The project data cannot be uploaded to the A drive or B drive when the project data
of the A drive or B drive is set up.
Execute setup cancel ( (2) Setup cancel operation) before uploading the
project data.
1 Touch [A: Standard CF Card] in Select
drive.
2 If touch the button, the screen
mentioned left is displayed.
3 Touching the button executes
uploading.
4 If any project data with the same name
exists in the A drive, the screen shown left
is displayed without starting uploading.
In this case, touching the button
overwrites the project data of the A drive
with the project data with the same name
of the A drive.
Touching the button cancels
uploading.
5 When the uploading is completed, the
dialog mentioned left is displayed.
Touching the button restarts the
GOT.
To Next Page
Loading...
