Need help?Do you have a question about the Mitsubishi GOT1000 and is the answer not in the manual?
General| Series | GOT1000 |
|---|---|
| Power Supply | 24 VDC |
| Type | HMI (Human Machine Interface) |
| Processor | RISC |
| Communication Interfaces | RS-232, USB |
| Storage Temperature | -20 to 60°C |
| Display Type | TFT LCD |
| Backlight Life | 50, 000 hours |
| Operating Temperature | 0 to 50 °C |
Defines DANGER and CAUTION hazard levels for user safety.
Safety measures for product design and usage to prevent accidents.
Safety measures to be taken during the installation of the GOT.
Safety measures to be taken during electrical wiring connections.
Safety measures to be taken before and during test operations.
Safety measures during startup, operation, and maintenance.
Guidelines for safe product disposal and transportation.
General introduction to the manual and the Mitsubishi Graphic Operation Terminal.
General precautions for using the manual and product.
Highlights key features and capabilities of the GOT.
Outlines the initial steps before operating the GOT.
Describes the general system setup and connections of the GOT.
Lists the components of the GOT and its optional accessories.
Lists general environmental and physical specifications of the GOT.
Details performance aspects like screen, panel, memory, and interface.
Lists power input voltage, consumption, and related specifications.
Identifies and describes the parts on the front of the GOT.
Identifies and describes the parts on the back of the GOT.
Outlines requirements for EMC compliance for products.
Lists standards applicable to the EMC Directive.
Safety measures to be taken during the installation of the GOT.
Specifies internal panel dimensions required for mounting the GOT.
Provides dimensions for cutting holes in the panel for GOT mounting.
Specifies clearances required around the GOT during mounting.
Details temperature and angle recommendations for GOT mounting.
Step-by-step guide for installing the GOT into a panel.
Safety measures to be taken during electrical wiring connections.
Details how to connect the power supply to the GOT.
Guidelines for internal and external wiring of the GOT.
Guidance on installing surge suppressors for noise reduction.
Information about protective sheets for the GOT screen.
Details, installation, and driver setup for the conversion adaptor.
Lists available utility functions for GOT setup and information.
Describes how to access and navigate the utility functions.
Describes how to change the display language of the GOT.
Settings for standard communication interfaces (PLC, PC).
Procedures for transferring project data between PC and GOT.
Tools for monitoring communication status and errors.
Settings related to the GOT display, such as screen save and contrast.
Settings related to GOT operation, such as buzzer volume and calibration.
Setting and displaying the clock (date and time) on the GOT.
Information on data storage locations within the GOT.
Information about the GOT's Operating System versions.
Procedures for clearing project data and resource data.
Information about the GOT's Operating System.
Steps to install the Standard monitor OS and communication driver.
Safety measures during startup, operation, and maintenance.
Daily checks to ensure the GOT is functioning correctly.
Periodic checks for the GOT's condition and performance.
Instructions on how to clean the GOT safely.
Provides physical dimensions of the GOT and cables.
Usage conditions for utility functions on GOT and software.
Lists functions added by GT Designer2 version upgrades.
Details warranty terms, range, and liability exclusions.
To Next Page
