12 - 6
12.2 Operation Settings
12.2.1 Operation setting functions
12.2 Operation Settings
12.2.1 Operation setting functions
Setting regarding GOT operation can be set.
The items which can be set are described below.
Operation settings by GT Designer2
Set buzzer volume and window move buzzer volume by [GOT setup] in [System
Environment] of GT Designer2.
When change a part of the setting, change the setting by the GOT display setting
after downloading the project data.
GT Designer2 Version Screen Design Manual
Section 3.8 Setting of the GOT display and operation (GOT setup)
12.2.2 Display operation of operation setting
Function Contents Setting range
Buzzer volume Buzzer volume setting can be changed
OFF/SHORT/LONG
<At factory shipment: SHORT>
Calibration Touch panel sensitivity can be adjusted using this function
−
<At factory shipment: already adjusted>
Touch .
Main Menu
Operation GOT setup
Touch [GOT setup].
Touch [Operation].
WWW.NNC.IR
To Next Page
Loading...
