Mitsubishi GOT1000 - 12 Display and Operation Settings (Got Set Up); Display Settings; Display Setting Functions

12 - 1
12.1 Display Settings
12.1.1 Display setting functions
9
UTILITY FUNCTION
10
LANGUAGE SETTING
11
COMMUNICATION INTERFACE SETTING
12
DISPLAY AND OPERATION SETTINGS
13
CLOCK SETTING
14
FILE DISPLAY
15
OS INSTALLATION
16
MAINTENANCE AND INSPECTION
12. DISPLAY AND OPERATION
SETTINGS (GOT SET UP)
Setting screen for display and setting screen for operation can be displayed from GOT setup.
In the setting screen for display and the setting screen for operation, the following settings can be set.
12.1 Display Settings
12.1.1 Display setting functions
Setting regarding display is possible. The items which can be set are shown below.
(1) Display setting by GT Designer2
Set title display period, screen save time and screen save backlight at [GOT set
up] in [System Environment] of GT Designer2.
When change a part of the setting after downloading the project data, change the
setting by [Display] screen of the GOT.
GT Designer2 Version
Screen Design Manual
(Section 3.8 Setting of the GOT display and operation (GOT setup) )
(2) Screen save and screen save backlight OFF function
When using the screen save and screen save back light OFF function, select
valid/invalid by the system information reading device in [System Environment] of
GT Designer2.
For system information details, refer the following.
GT Designer2 Version
Screen Design Manual
(Section 3.6 Setting System Information)
Screen Description
Setting screen for display
Screen save time
Screen save backlight
Contrast
Setting screen for operation
Buzzer volume
Calibration
Items Contents Setting range
Screen save time
The period from the user stops the touch panel operation
till the screen save function starts can be set.
0 to 60 minutes
<At factory shipment: 0 minutes>
When set to 0, the function
becomes invalid.
Screen save backlight
Whether turn ON or OFF the backlight simultaneously at
the screen save function start can be specified.
ON/OFF
<At factory shipment: OFF>
Contrast Contrast can be adjusted.
16-level adjustment (0 to 15)
<At factory shipment: 10>
WWW.NNC.IR