8 - 5
8.2 RS-232/USB conversion adaptor
8.2.3 Driver installation
8.2.3 Driver installation
Procedure for installing the driver is explained below.
Windows XP installation follows.
• Windows 98, Windows 98SE, Windows Millennium Edition, and Windows 2000, the installation
method will vary.
Installation of the driver is canceled during the following process, the installation is not carried out correctly.
If the installation is canceled, uninstall the driver and install again.
Please refer to Section 8.2.4 for instructions on uninstalling the driver.
Please install the driver with the following procedure.
1 When the USB cable is connected to the personal computer, the following screen is displayed.
(Installation of the software for USB driver)
Insert the included CD-ROM into the personal computer's CD-ROM drive.
Click [ Next > ].
The installation of the USB driver software will begin.
• If using Windows 98, Windows 98SE, Windows Millennium Edition, and Windows 2000, a
window to select the location of the installation files.
Please select the CD-ROM drive.
2 The following screen is displayed. (Only in Windows XP)
Click [ Continue Anyway ].
WWW.NNC.IR
To Next Page
Loading...
