8 - 6
8.2 RS-232/USB conversion adaptor
8.2.3 Driver installation
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
PART NAME
5
EMC DIRECTIVE
6
INSTALLATION
7
WIRING
8
OPTION
3 The following screen is displayed.
Click [ Finish ].
The installation of the USB driver software will finish.
• If Windows 98, Windows 98SE or Windows Millennium Edition is used, installation of the USB
Serial Port software begins, and ends automatically.
The CD-ROM can be removed from the personal computer at this time.
• If using Windows 2000 or Windows XP, proceed to step .
4 The following screen is displayed.
Click [ Next > ].
The installation of the USB Serial Port software will begin.
• If using Windows 2000, a screen to select the location of the installation files is displayed.
Please select the CD-ROM drive.
5 The screen of is displayed. (Only in Windows XP)
Click [ Continue Anyway ].
WWW.NNC.IR
To Next Page
Loading...
