Mitsubishi GOT1000 User Manual

11 - 3
11.1 Standard I/F Setting
11.1.3 Display contents of standard I/F
9
UTILITY FUNCTION
10
LANGUAGE SETTING
11
COMMUNICATION INTERFACE SETTING
12
DISPLAY AND OPERATION SETTINGS
13
CLOCK SETTING
14
FILE DISPLAY
15
OS INSTALLATION
16
MAINTENANCE AND INSPECTION
(3) Channel no. display BOX
0: Set when the communication interface is not used.
1: Set when connecting to PLC.
(settable only for the interface (Standard I/F-1) for communication with PLC)
9: Set when connecting to PC (GT Designer2).
• Setting is not allowed for 2 to 8, *.
(4) Driver display BOX
The name of the communication driver for which a channel number is assigned is displayed.
"None" is displayed in the driver display box in the following cases :
• The communication driver is not installed. ( Section 14.2 OS Information)
• "0" is set in the channel number specification menu box.
[*****] will appear when the communication driver that was installed on the GOT from GT Designer2
and the controller setting that was downloaded on to the GOT from Designer2 do not match.
When setting the channel number to "9", the communication driver "Host (PC)" is automatically
assigned.
When the driver display box is touched, the screen jumps to the detail information screen and the
communication parameter appears.
2 Detail information display operation
The types of items that are in the communication parameter setting menu depend on the type of
communication driver that is installed on the GOT in use.
Refer to the section below for the setting contents of various drivers.
GT Designer2 Version Screen Design Manual
Section 3.7 Communication Interface Setting (Communication Settings)
1 Touch Standard I/F-1 driver display box in
the Standard I/F setting window.
2 The screen jumps to the detailed
information screen and the communication
parameter will appear.
Use the , buttons to toggle through
the items when there are multiple items to
be set.
(The , buttons will not work when no
other items are available.)
3 Touch the button to close the detail
setting screen.
Touch [Driver display BOX].
ESC
WWW.NNC.IR

Mitsubishi GOT1000 Specifications

General

Series	GOT1000
Power Supply	24 VDC
Type	HMI (Human Machine Interface)
Processor	RISC
Communication Interfaces	RS-232, USB
Storage Temperature	-20 to 60°C
Display Type	TFT LCD
Backlight Life	50, 000 hours
Operating Temperature	0 to 50 °C