9
Note: This document is for reference only. For detailed settings and safety information refer to the respective product manual.
When setting the station number indirectly, the station number of the inverter
can be changed using the 16-bit GOT internal data register (GD10 to GD25).
When specifying the station No. from 100 to 155 on GT Designer 2, the value
within GD10 to GD25 is equal to the station No.
Specification
station no.
Compatible Device Setting range
100 GD10
101 GD11
102 GD12
103 GD13
104 GD14
105 GD15
106 GD16
107 GD17
108 GD18
109 GD19
110 GD20
111 GD21
112 GD22
113 GD23
114 GD24
115 GD25
0 to 31
If the associated device contains
a value outside this range an
error (dedicated device is out of
range) will occur.
Confirm Communication
The communication monitoring is a function that checks whether the GOT can
communicate with the Inverter. If no error is shown, communication has been
set up correctly.
To Next Page
Loading...
