O PresstheAUDIO/VIDEObuttonontheremotecontrolto see
thefunctionmenu.
_Important:
0
0
VCR
REC speed SP
_-ADJUST to select
Press the AUDIO/VIDEO button repeatedly until the function
you want to adjust appears.
Press the ADJUST buttons on the remot._ to adjust the
setting. The functions will disappear if'you do not press any
buttons for 5 seconds.
The function menu does not appear when the other VCR menus
are displayed; or during special effects playback. The recording
speed (REC speed) and tape functions do not appear during
playback. The PerfecTape ®function is displayed only when a tape
with its erasure tab intact is loaded and the VCR is stopped.
Recording
Your new VCR offers a wide variety of recording options that take
full advantage of our advanced electronics. This section tells you
about the following recording; procedures:
• Recording a current broadcast,
• Programming your VCR to record,
• Using One-Touch Recording (OTR),
• Using One Key Programming,
• Using Quick Program, and
• Notes about programmed recording.
Recordingacurrentbroadcast
Beforeyoubegin,youneedto knowhow:
• to view the picture coming from your VCR. (See page 22.)
To record a TV program that is currently playing:
O Load a tape with its erasure tab intact it,to the VCR. If you
have not yet recorded on this tape, the VCR will test the tape
with the PerfecTape ®feature. (For more information on this
feature, please see page 49.)
If you have not already done so, set the speed at which you
would like to record. (See "Selecting and adjusting the audio
and video functions" on page 34.)
35
To Next Page