Features and controls
3-11
3
3. Remove the remote control transmitter from the remote
control transmitter case. Then, open the remote control
transmitter using the method described in step 1.
4. Remove the old battery.
5. Install a new battery with the + side (A) down.
6. Close the remote control transmitter firmly.
7. Place the remote control transmitter in the remote control
transmitter case, then securely close the remote control
transmitter case.
8. Check the keyless entry system to see that it works.
OTE
● A certified i-MiEV dealer can replace the battery for you
if you prefer.
CAUTION
!
● When the remote control transmitter case is opened,
be careful to keep water, dust, etc. out. Also, do not
touch internal components.
+ side
- side
Coin type battery CR1620
BK0140800US.book 11 ページ ２０１１年９月２９日 木曜日 午後３時２８分
To Next Page
Loading...
