3-118
Features and controls
3
3. Connect a commercially available USB connector cable
(C) to the USB memory device (B).
4. Connect the USB connector cable (C) to the USB input
terminal (D).
OTE
● Do not connect the USB memory device to the USB input
terminal directly.
The USB memory device may be damaged.
5. To remove the USB connector cable, turn the electric
motor switch to the “LOCK” position first and perform
the installation steps in reverse.
WARNING
!
● Place the USB memory device and the USB connec-
tor cable so as not to interfere with driving.
BK0140800US.book 118 ページ ２０１１年９月２９日 木曜日 午後３時２８分
To Next Page
Loading...
