6-14
For emergencies
6
11. Holding the sealant bottle upside-down, squeeze it again
and again to inject all of the sealant into the tire.
12. After injecting the sealant, pull the hose off the valve,
remove any residual sealant from the valve, rim and/or
tire.
Fit the valve insert (J) into the valve (H), and screw the
valve insert securely into place using the valve remover
(I).
BK0140800US.book 14 ページ ２０１１年９月２９日 木曜日 午後３時２８分
To Next Page
Loading...
