Mitsubishi LT2-2230 User Manual

OPERATION
Adjustment of stitch length and stitch
reversing (touch back)
Note: To make stitch length smaller, depress
the feed reverse lever and set the stitch length
setting dial to a desired position.
Stitch length ^
setting dial
Feed reverse
lever
[6! Setting of bobbin
(1) Pull out 5 cm thread tail from the bobbin.
(2) Hold the bobbin so that the bobbin thread is would
in right direction and put it into the hook.
Ft] Adjusting,of needle thread guide
Please adjust needle thread guide of n'.^edle thread
tensioner according to sewing condition.
Thread
guide
position
Left Middle
Right
Materials
The thicker
than
standard
The thin
ner than
standard
Needle
thread
supply
More Standard Less
• Touch-back button . . . Direction of stitching
can be reversed by depressing this button.
Stitching goes on in reversed direction while the
button is held down, and returns to forward
direction when the button is released.
Thread tail
Touch-back
^ button
— 8
From the library of: Superior Sewing Machine & Supply LLC

Mitsubishi LT2-2230 Specifications

General

Brand	Mitsubishi
Model	LT2-2230
Category	Sewing Machine
Language	English