Mitsubishi LU2-4410 - SPECIFICATIONS; Model; Application; Max. sewing speed

SPECIFICATIONS
Specifications
Model
LU2-4410-BIT
. LU2-4410-B1T-CS
LU2-4430-B1T
Number of needles
Single-needle Double-needle
Application
Heavy material
Automotive seat
Heavy material
Max. sewing speed (spm) 2000
2000 2000
Sticch length
(mm) 0~9
0
1
(O
0~9
Presser-foot
Hand 8
8 8
stroke (mm)
Knee lifter 16 16
16
Needle No. DPX17 #23 DPX17 #23 DPX17 #23
Needle-bar stroke
(mm)
36
35 36
Thread take-up lever stroke (mm)
74.5
70 74.5
Vertical stroke of upper feed (mm)
2~6
(D
I
CM
2~6
Automatic Thread trimmer
O o O
Touch back
O
o O
Hook (horizontal full-rotating)
Large
Bobbin
Aluminum trimmer type
Lubrication system
Automatic lubrication
Oil MC70M
Bed dimensions
(mm)
517 X 178
Needle gauge (mm)
Standard: 6.4
Special:
3.2, 4, 4.8, 8. 9.5,
12.7, 16, 19. 25.4
Notes: • Some materials, gauge sizes, and/or sewing conditions may require specifications other
than those listed above.
• Feed dog, throat plate, rotating hook, bobbin case and bobbin should be those designed for thread
timmer.
• Bobbin should be of high quality free from deformation.
• This specification is subject to change for machine improvement.
- 24 -
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com