Mitsubishi LU2-4410 User Manual

OPERATION
[T] Installation of needles Note: Before installing the needles, be sure to turn off the power.
Double Needle
Insert the needle upto the bottom
of needle clamp and tighten the
screw keeping the long grove side of
needle face to face.
Long groove
side
nsufficient
insertion
Needle distorted
Single-
Needle
Long groove
left side
I Winding of bobbin thread Note: When bobbin thread is wound, keep the presser foot lifted.
Adjustment:
• Tension of wound thread Slack winding is recommended for polyester thread and nylon thread.
• Conically wound thread Move the thread guide toward smaller diameter of wound thread layer.
• Length
of wound thread Loosen the thread length adjusting screw to increase length of thread
and tighten the screw to decrease length of thread.
i
Winding tension
/A adjusting screw
I
Thread
guide
Even winding
with amount of
80% of full
capacity
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com

Mitsubishi LU2-4410 Specifications

General

Brand	Mitsubishi
Model	LU2-4410
Category	Sewing Machine
Language	English