Mitsubishi MELSEC-A A1SCPUC24-R2 User Manual

94
"BATTERY
ERROR"
(Checked at
power-on)
70 Continue
(1) The battery voltage
has dropped to
below the specified
value.
(2) The lead connector
of the battery is not
connected.
(1) Replace battery.
(2) Connect the lead
connector if RAM
memory or power
failure
compensation
function is used.
Table 6.1 Error Code List for A1SCPUC24-R2 (Continue)
Error Message
Error Code
(D9008)
CPU
States
Error and Cause Corrective Action

Mitsubishi MELSEC-A A1SCPUC24-R2 Specifications

General

Brand	Mitsubishi
Model	MELSEC-A A1SCPUC24-R2
Category	Controller
Language	English